Najlepsze Piła Stołowa Ranking 2023

★★★★★ I was impressed with the quality for the money.I was impressed by the design of the bench which is sturdy and stable.The saw blade delivered was very good and cut perspex easily.The ruler is accurate to about 1mm.I liked the ease of setting up and moving the guides.The only thing I found annoying is the noise. It is very noisy.

★★★★☆ This saw has plenty of power and has replaced a long standing name brand that I had in my semi pro work shop.Pro'sThis has all the power you'd need for DIY applications and those of moderate fitting professions.This light weight and able to be moved around quite easily.The measurements on the attached tape is very accurate.It is quite easy to assemble.The price is pretty economical as compared to other alternatives.Con'sThe base is made of plastic. I must be honest I was not expecting that. If using without the legs its a little mobile and wants to move when cutting which is not a great thing.The metal components seem a tad on the thin side. This said once built they seem to be adequate.I think the blade protection and extraction hose tend to get in the way of cutting on larger cutting jobs so in my scenario I do not use these.This comes fitted with a European plug. If your looking to use in the UK please note you'll either need to fit your own plug or buy an adapter for it. This unit has no bottom to any saw dust you do generate will be sitting directly under the saw or on the table top if your using it in this capacity.Overall it is a pretty good piece of kit. If asked would I buy it again I think I would probably say yes.

★★★★☆ First things first. It cuts.It arrived as expected with Amazon. A good buying and delivery experience.Upon opening it was apparent the table was bent. I had two options, return and await a new one to be delivered, or be impatient and manually bend the thin metal back into place and utilise a spirit level to tell me when to stop.I was impatient. No drama, I done what was needed. As I was planning to build a cross sled and use the saw mainly for small cross cuts this wasn't an issue.So accuracy, it needed adjusting. Do not trust the angles on the saw tilt. You set it to 0 and it'll actually be about 10 degrees. I purchased a digital angle finder and trust in that.The tape measure and measurement finder on the table. Not accurate, about 3-5mm out. If ripping material with the fence I'd recommend using a metal rule and your eye for this and not relying on the manufacturers guides. Again, this isn't an issue for me as I built my own sled using the 5 cut method and now have accuracy to withing a thousand of an inch.Ease of use. It spins really fast and cuts wood, and also fingers. It's a simple plug in (3 pin), hit the green button and cut. Comes with a push stick (buy another for two directions of pressure).Value for money. I certainly wouldn't buy cheaper, but for what I needed it for, small projects utilising a push sled, it's perfect and didn't cost the Earth. Yes there are better out there, yes I one day aspire for bigger, but this is really all you need for small garages and projects.Oh, it's very messy. I hook it up to my Kercher W2 hoover. Next to useless. The hoover sucks fine, but the dust seems to chuck down to the floor and not the hoover extraction pipes fitted at the rear. Could this be rectified with a high volume low pressure vac? Probably. Do I want to spend hundreds doing do just yet? Nope. Just a forewarning to fellow hobbiests that your wives/husbands may well moan about covering your darling sons bike in sawdust.Would I recommend this saw? Yes.

★★★★★ If you use a table saw, router etc then this is a must purchase. This product is very well made and easy to put together. it allows the work to be pushed though the cutting tool with little to no risk of kick back (table saw). Obviously this isn't fool proof and normal safe working practices should be adopted. This is better than any other push stick device I have used. There are lots of you tube videos showing the uses of this device and many makers use them everyday. Yes its at a high price point but I think its worth the money given the control and safe operation you get with its use. Look youtube to see it in action and make you decision. I don't think you will regret it. But be safe with any cutting machine you use. Here ends the lecture!

★★★★☆ This is a very useful tool which, if used correctly, makes using large workshop tools (table saw, table router, jointer, etc.) LESS dangerous - they will always be dangerous. It is well made and functions very well. However it is very expensive for what it is and particularly if you want any of the upgrades or need two of them. There are alternatives that can be made from scrap wood which appear to be effective (see Steve Ramsey on a certain video streamer - unfortunately I saw it after buying my gripper).

★★★★★ For the price you would have expected to get the MICROJIG Gravity heel kit with it, but having said that it is a must for a Table saw &Router table

★★★★★ This compact nano saw is very well designed. It’s light, portable, easy to set up, quick change blade. The dust extract works well. Very happy buyer.

★☆☆☆☆ A very poor saw, hard to cut in a straight line.Will not cut hardwood, or material thicker than 12mm.Masses of tear out, leaves a really rough edge.Big mistake buying this saw, not the sellers fault, I should have checked the reviews first.It’s in a cupboard now, and staying there

★☆☆☆☆ It leaves tare out but it's ok for quick cutting jobs if you like poorly made jobs I wish I hadn't bothered

★★★★★ Der Anschlag ist Klasse. Robust und sehr gut verarbeitet. Habe sie für die dewalt TischkreissägeDwe 7485-qs und sie passt hervorragend.100%Prozent winkelige Schnitte.

★★★★★ Gut verarbeitet, genau

★★★★★ Matériel solide. Le jeu qui peut survenir dans la glissiere se compense en serrant les anneaux. L'équerrage peut également être ajusté en desserrant et resserrant les vis du rapporteur. Très content de cet achat.

★★★★☆ Worked perfectly after assembly. Solid construction and the quality of the tool meant good, clean repeat cuts. The only gripe I had was that the written instructions were in German, French, Dutch, Spanish, Portugese, Italian.... But I didn't get any in English. Not a major problem as instructions are online too. Very happy overall.

★★★★★ This is a decent DIY saw and easy to assemble, unfortunately the box cam with damage and the plastic bag with all the nuts, bolts etc was ripped and a few bit were missing, also the cross braces were missing.I messaged Amazon (no reply yet, been 3 days) contacted Einhell online, they were very quick to reply and apologised asking for my address so they could send the missing parts to me.Apart from the not so good service from Amazon the saw works very well, you have to check the parallel stop with a tape to ensure it is square, when done it cuts square all the time, It comes with all the bits you need to make your DIY projects look good.A good purchase.

★★★☆☆ The installation process was absolutely excruciating, took me just over 3 hours and lots of swearing. Constantly flicking back and forth through the manual as the text references pictures at the front of the booklet to save paper. I’ve not done that much flicking of the wrist since I was 13!I got the bench set up and agree with another reviewer on here, it will not set to 0 degrees (see photos). This means you can’t get an exact 90 degree cut. I can live with that though. I can also live with the fact the tool came in a battered box with the plastic guard for the off switch snapped and a small dent in the table. Lots of reviews have said the same regarding the battered box and receiving a damaged tool. I managed to get twenty quid back from Amazon.The disc guard is flimsy and annoying so I just uninstalled it. Although I don’t recommend doing that!Once up and running it’s loud, so get some ear protection on. Other than that it cuts fine although I haven’t tried anything more than 1x3 yet.I measured and the max cut height I could get is 80mm.Suggestions:1) Put the cross bars on the bottom (1 page instruction sheet) before going ahead with the instructions in the chunky booklet.2) If the instructions say “do the nuts up loosely” don’t do the nuts up tight. If they say “hide in a bush and jump out screaming at a pensioner”, do it. It’s painful but I can bet it’s even more painful if you get stuck and have to undo things. Follow the text and do EXACTLY what it asks; donot deviate. Despite what you may think, you don’t know better.3) For the hundreds of nuts, bolts, spring washers and normal washers (believe me, it’s ridiculous), instead of using the metal wrench they provide, I got my Bosch cordless drill and a 10mm nut driver. Set the torque to 5. I can imagine it would have put another hour on the install time just doing up deez nuts.4) The rip gate cannot be guaranteed to be accurate by relying on the gage alone. Set the gage line correct by unscrewing the screw and tightening when correct distance is achieved using a tape measure. Once gage line is accurate, before cutting, measure from the edge of the disc to the rip gate (at the rear) before clamping the rip gate down.A funny thing. Set the push bar up in a certain way and it looks like a high dude smoking a spliff (photo attached).

★☆☆☆☆ The allen key adjustments Don't work .

★★★★☆ L'article est conforme a la commande.Mais je vais ment servir que fin janvier prochain .

★★★★★ Ideal for saw bench

★★★★★ Perfect for the price.

★★★★★ Works well.

★★★★★ Perfect for my needs and well made

★★★★★ Extremely well finished and accurate. Used as track for home made router table.

★★★★☆ Le T-track sono ben fatte, robuste e un bel colore blu. Unica pecca una T-track presentava una bava di lavorazione che non permetteva lo scorrimento del dado...ho sistemato con una lima e adesso il dado si muove benissimo

★★★★★ Nice and strong, very happy with it.

★★★★★ Buona la fattura e corrispondente alla descrizione in tutti gli aspetti.